» Cars for sale in Australia » Notspecified » Alloy Plate Dive Boat- 8.5 mtrs L.O.A. Beam of 2.5 mtrs. Deep freeboard.

 

Alloy Plate boat. 8.5 mtrs LOA. Project
Ex dive boat. Very, very solid. Deep freeboard.Excellent rear egress/ingress for divers. Large solid DuckboardUnknown builder but quite possibly Starcraft build ) 
Owner is retiring from marine related business.
Has no corrosion at all in any way.A very ,very solid plate boat .Built like the proverbial brick shithouse
We have abrasive blasted this hull and it has had pack marine prime coats. The starboard side has small couple of sections above the waterline near the gunnels of approximately 12" inches square that requires cutting and plating if you want to see it totally faired. have purposely left it as it is for the next owner to decide whether to fix it or live with it. Structurally it is  fine but cosmetically it could be perfect if repaired. Could have done what some would do and throw fairing compound over it but its not my go.I have some mm alloy plate that can go with it.
Left in marine primer for new owner to decide final topcoat/antifoul colours.
One of the photos show about 10 long lengths of alloy 32 mm pipe that go with the boat for construction of new gunnel and /or bow rails where required.
Also shown are Mercury 200 hp long legged outboards with about 360 hours use nice clean motors but older type yes that can go with the sale by negotiation if wanted.
Alternatively we have real nice Johnson Bombardier 225 hp stroke available.
The hull is sitting on channel type dual axle Felk trailer that was originally off 24 ft Dehavilland alloy boat which have been using as haul out trailer for some time.I have welded some temporary  supports on to the trailer to undertake work on this hull that will come off with ease.This trailer would easily pass rego with little work new brake pads /lights/ brake lines etc )The trailer is  not included in this auction but will negotiate its sale to the succesful purchaser if required.
Alternatively we can load to your organised transport with Franna crane for nominal lifting fee.
This is no reserve auction.To arrange inspections please contact John on 0422-134144, but please only call after pm and before 9pm as cannot answer calls during working hours. Not keen on email ping pong or time wasters. Wont answer texts or private numbers- everRing for best results
Listed elsewhere and can be removed at any time

• (enter the number)

  

Post!